WTS : Astronomy Equipment Accessories
Posted: Mon Aug 07, 2017 12:44 am
Hello all, its time to start clearing my astro stuff.
The following items in the photo below - items are in used condition (with user marks) unless otherwise stated. :
1) TS Optics 2 inch extension tube 35 mm: S$30/- [SOLD]
http://www.teleskop-express.de/shop/pro ... -long.html
2) Hotech SCA-TA2 2 inch adapter - has a t-thread M42-P0.75. S$40/-(SOLD)
3)Vixen Weight shaft camera bracket - S$40/- https://www.vixenoptics.com/Vixen-Weigh ... p/3796.htm [AVAILABLE]
4) JMI Motofocus NGF-S focuser - S$60/- Please note that this focuser needs some soldering skills - the connector wire to the motor needs to be soldered to work. Will give warranty on this - ie if after soldering, it doesnt work - will refund. The threads on one end of the ADPTSCTL adapter are 2"- 24 female SCT if you have an adapter or connector that is 2"-24 SCT Male then you should be able to couple to it. So one side is your normal 2 inch - the other end needs a SCT adapter to thread to whatever you have. (SOLD)
5) fine tuning XY mount - S$120 - unused [AVAILABLE]. I bought this intending to attach the Vixen Polarie so that I can polar alighment more accurately - never got round to it. Was purchased in Japan - cannot remember what the brand is. Has the typical Takahshi green - but i dont think it is takahashi - maybe someone knows? Threads are 1/4 inch - so it can be mounted on a camera tripod - and the top screw is also a 1/4 inch to thread say onto the Vixen Polarie base.
6) Orion Shorty Plus 2x Japan 3 element Barlow - S$60/- (withdrawn)
7) Vixen illuminated guider GA-4 (Japan) S$100/- (SOLD)
Lot 1 by tuna7777, on Flickr
PM if need better photos - deal at Vivo city at convenient timing. Thanks for looking.
The following items in the photo below - items are in used condition (with user marks) unless otherwise stated. :
1) TS Optics 2 inch extension tube 35 mm: S$30/- [SOLD]
http://www.teleskop-express.de/shop/pro ... -long.html
2) Hotech SCA-TA2 2 inch adapter - has a t-thread M42-P0.75. S$40/-(SOLD)
3)Vixen Weight shaft camera bracket - S$40/- https://www.vixenoptics.com/Vixen-Weigh ... p/3796.htm [AVAILABLE]
4) JMI Motofocus NGF-S focuser - S$60/- Please note that this focuser needs some soldering skills - the connector wire to the motor needs to be soldered to work. Will give warranty on this - ie if after soldering, it doesnt work - will refund. The threads on one end of the ADPTSCTL adapter are 2"- 24 female SCT if you have an adapter or connector that is 2"-24 SCT Male then you should be able to couple to it. So one side is your normal 2 inch - the other end needs a SCT adapter to thread to whatever you have. (SOLD)
5) fine tuning XY mount - S$120 - unused [AVAILABLE]. I bought this intending to attach the Vixen Polarie so that I can polar alighment more accurately - never got round to it. Was purchased in Japan - cannot remember what the brand is. Has the typical Takahshi green - but i dont think it is takahashi - maybe someone knows? Threads are 1/4 inch - so it can be mounted on a camera tripod - and the top screw is also a 1/4 inch to thread say onto the Vixen Polarie base.
6) Orion Shorty Plus 2x Japan 3 element Barlow - S$60/- (withdrawn)
7) Vixen illuminated guider GA-4 (Japan) S$100/- (SOLD)
Lot 1 by tuna7777, on Flickr
PM if need better photos - deal at Vivo city at convenient timing. Thanks for looking.