TPS Demo/Used Clearance Sales

[Lee]

We are trying to clear out some of the following items (attached) at very attractive pricing. Please contact us for further clarifications via our email sales@tps.sg or leewk@tps.sg or HP: 96192273.

You can also view them at www.tps.sg/clearance.htm
Images will be posted shortly.

[Airconvent]

wow wee kiong,
$1800 for the 7" LX200 is a really good price inspite of the optical issues !
If its not that bulky, I'll be very tempted..

rich

[Lee]

wow wee kiong,
$1800 for the 7" LX200 is a really good price inspite of the optical issues !
If its not that bulky, I'll be very tempted..

rich

Yes, it's bulky and just like to add the fork mount drive electronics had been replaced before and may sometime be intermittent !!!
Had been tentatively reserved for a Pri Sch club as a loan piece.

[David Lian]

Hi Lee,
Where to send to if you need to get rid of the fungue???
How does it cost more?
Whoa!With this at Tuas on good clear nite, it will wonderful view to have.It will be dream come through>< to have this scope.
Regards
DL
PS:Now anyone want my C8 with fork mount????

[Airconvent]

PS:Now anyone want my C8 with fork mount????

everyone here want!! but then, you are not giving it away for free....?..:-)
actually the fungus can be cleaned by yourself. you need to note the exact position of the corrector plate assembly (using masking tape and thin marker) before unscrewing the plate and gently cleaning the fungus away using soft cotton and isopropyll solution. then when it's cleaned and dried, screw the assembly back to the exact same position. at least that how I understand its done. anyone can comment?

rich

[Lee]

Hi Lee,
Where to send to if you need to get rid of the fungue???
How does it cost more?
Whoa!With this at Tuas on good clear nite, it will wonderful view to have.It will be dream come through>< to have this scope.
Regards
DL
PS:Now anyone want my C8 with fork mount????

Once you got fungus it's almost impossible to get rid off. You can only
clear it but it will leave a smudge on your coating and prevent further spreading. Strong alcohol will do it.

[Lee]

PS:Now anyone want my C8 with fork mount????

everyone here want!! but then, you are not giving it away for free....?..:-)
actually the fungus can be cleaned by yourself. you need to note the exact position of the corrector plate assembly (using masking tape and thin marker) before unscrewing the plate and gently cleaning the fungus away using soft cotton and isopropyll solution. then when it's cleaned and dried, screw the assembly back to the exact same position. at least that how I understand its done. anyone can comment?

rich

Yes, I had completely remove both corrector & mirror on my 3.5" to clean them. I have used 99.9% pure Iso & MEK but almost impossible to remove the fungus without smudging the coating. I will try with my 5" & 7" next.

[Lee]

The above Clearance/Demo Sales had ended.
Thanks !