[font=Comic Sans MS]HI ALL,
GOOD NEWS FOR ALL !
THE IOPTRON MINI-TOWER WILL BE HERE THIS WEEK FOR YOUR EVALUATION, LOOK OUT FOR THE UPDATE.
THANK YOU FOR VIEWING, PLEASE SMS ME FOR APPOINTMENT.
ROBIN LOW
STAROPTICS SCIENTIFIC
H/P: 9 383 5173[/font]
IOPTRON PRODUCTS
-
- Vendor
- Posts: 99
- Joined: Sat May 10, 2008 10:37 am
- Location: Singapore
- Contact:
-
- Vendor
- Posts: 99
- Joined: Sat May 10, 2008 10:37 am
- Location: Singapore
- Contact:
-
- Vendor
- Posts: 99
- Joined: Sat May 10, 2008 10:37 am
- Location: Singapore
- Contact:
Hi, I need to refer to my setup and I can't reply you as at this juncture as I have not seen the mount yet, I think you may need an additional adapter for it, just like the one in picture, or you can use WO dovetail plate.VinSnr wrote:Robin,staroptics_robin wrote:[font=Comic Sans MS]HI ALL,
THE IOPTRON MINI TOWER WILL BE READY FOR EVALUATION ON THIS SUNDAY 29/11/08 FROM 3PM ONWARDS, PLEASE SMS MOBILE : 9 383 5173 OR APPOINTMENT.
CLEAR SKY
ROBIN LOW
STAROPTICS SCIENTIFIC[/font]
Does the mini tower has a dual head version?
Robin Low
-
- Vendor
- Posts: 99
- Joined: Sat May 10, 2008 10:37 am
- Location: Singapore
- Contact:
Hi Vincent,VinSnr wrote:Robin,staroptics_robin wrote:[font=Comic Sans MS]HI ALL,
THE IOPTRON MINI TOWER WILL BE READY FOR EVALUATION ON THIS SUNDAY 29/11/08 FROM 3PM ONWARDS, PLEASE SMS MOBILE : 9 383 5173 OR APPOINTMENT.
CLEAR SKY
ROBIN LOW
STAROPTICS SCIENTIFIC[/font]
Does the mini tower has a dual head version?
Finally the mount arrived, is a solid pc of metal with plaster housing, it came with GPS, counter weight, weight shaft and additional dovetail bracket if you want to mount 2 scopes. I'll post some photo in my web and singastro for everyone to share, is a good mount and value for money ! I have no regrets bring in as it surpasses even the vixen skypod in term of function and payload.
Cheers,
Robin Low
sounds exciting. Will wait for the photo. More importantly, if it is use under dual head mode, are there any screws on one end that allow us to make fine alignment so that both scopes can be pointed at the same object.staroptics_robin wrote:Hi Vincent,VinSnr wrote:Robin,staroptics_robin wrote:[font=Comic Sans MS]HI ALL,
THE IOPTRON MINI TOWER WILL BE READY FOR EVALUATION ON THIS SUNDAY 29/11/08 FROM 3PM ONWARDS, PLEASE SMS MOBILE : 9 383 5173 OR APPOINTMENT.
CLEAR SKY
ROBIN LOW
STAROPTICS SCIENTIFIC[/font]
Does the mini tower has a dual head version?
Finally the mount arrived, is a solid pc of metal with plaster housing, it came with GPS, counter weight, weight shaft and additional dovetail bracket if you want to mount 2 scopes. I'll post some photo in my web and singastro for everyone to share, is a good mount and value for money ! I have no regrets bring in as it surpasses even the vixen skypod in term of function and payload.
Cheers,
Robin Low
-
- Vendor
- Posts: 99
- Joined: Sat May 10, 2008 10:37 am
- Location: Singapore
- Contact:
Yes, the both side of the axis can be adjusted and fine tune, touching it is better to just look at it, may be you can make a trip down my place this week end and apreciate it yourself. Haha.VinSnr wrote:sounds exciting. Will wait for the photo. More importantly, if it is use under dual head mode, are there any screws on one end that allow us to make fine alignment so that both scopes can be pointed at the same object.staroptics_robin wrote:Hi Vincent,VinSnr wrote: Robin,
Does the mini tower has a dual head version?
Finally the mount arrived, is a solid pc of metal with plaster housing, it came with GPS, counter weight, weight shaft and additional dovetail bracket if you want to mount 2 scopes. I'll post some photo in my web and singastro for everyone to share, is a good mount and value for money ! I have no regrets bring in as it surpasses even the vixen skypod in term of function and payload.
Cheers,
Robin Low
Robin Low
-
- Vendor
- Posts: 99
- Joined: Sat May 10, 2008 10:37 am
- Location: Singapore
- Contact:
IOPTRON GOTO MOUNT
[font=Comic Sans MS]HI ALL,VinSnr wrote:sounds exciting. Will wait for the photo. More importantly, if it is use under dual head mode, are there any screws on one end that allow us to make fine alignment so that both scopes can be pointed at the same object.staroptics_robin wrote:Hi Vincent,VinSnr wrote: Robin,
Does the mini tower has a dual head version?
Finally the mount arrived, is a solid pc of metal with plaster housing, it came with GPS, counter weight, weight shaft and additional dovetail bracket if you want to mount 2 scopes. I'll post some photo in my web and singastro for everyone to share, is a good mount and value for money ! I have no regrets bring in as it surpasses even the vixen skypod in term of function and payload.
Cheers,
Robin Low
AS PROMISED, PLEASE REFER TO SOME PHOTOS OF THE MOUNT. FOR MORE INFORMATION, PLEASE GOTO www.staropticsscientific.com FOR MORE LATEST INFORMATION.
CHEERS
ROBIN LOW
STAROPTICS SCIENTIFIC[/font]
You do not have the required permissions to view the files attached to this post.