DIY Ball Scope / "Portaball" alike

Wanna make a scope? Or better still, grind a mirror yourself. Or, you have some good tips in making a really useful accessory? This is the place to show what your hands can do...
User avatar
orly_andico
 
Posts: 1573
Joined: Sun Aug 09, 2009 11:14 pm
Location: Braddell Heights

DIY Ball Scope / "Portaball" alike

Postby orly_andico » Sat Mar 07, 2015 10:44 am

Just was made aware of this: Ikea Brasa pedestal lamp

http://www.ikea.com/sg/en/catalog/products/80138414/

Available at Singapore branches for $79. It is a 45cm powder coated steel hemisphere.

If you've ever tried making a ball scope, you'll know that the ball itself is a major headache to source. This one is 18" diameter so should be good for a 12" to 14" mirror maximum.

User avatar
Airconvent
Super Moderator
 
Posts: 5386
Joined: Tue Sep 30, 2003 11:49 pm
Location: United Federation of the Planets

Re: DIY Ball Scope / "Portaball" alike

Postby Airconvent » Sat Mar 07, 2015 2:31 pm

Or use as a curry pot if the project fails :p
This is just 1 part though. Alot of work will need to be done. Since the Portaball, there has been alot of collapsible truss dobs like the one Junwei has, hence not too sure building a portaball is worth the effort. Maybe Chee Chien and Mooey can violently object to this observation? :)
The Boldly Go Where No Meade Has Gone Before
Captain, RSS Enterprise NCC1701R
United Federation of the Planets

User avatar
orly_andico
 
Posts: 1573
Joined: Sun Aug 09, 2009 11:14 pm
Location: Braddell Heights

Re: DIY Ball Scope / "Portaball" alike

Postby orly_andico » Sat Mar 07, 2015 3:00 pm

well one thing the Portaball-style telescopes can do very well is that they can be driven without using an equatorial table.. (see Trackball Telescope).

User avatar
rlow
 
Posts: 2329
Joined: Fri Oct 31, 2003 7:36 pm
Location: Jurong

Re: DIY Ball Scope / "Portaball" alike

Postby rlow » Sun Mar 08, 2015 12:22 am

orly_andico wrote:Just was made aware of this: Ikea Brasa pedestal lamp

http://www.ikea.com/sg/en/catalog/products/80138414/

Available at Singapore branches for $79. It is a 45cm powder coated steel hemisphere.

If you've ever tried making a ball scope, you'll know that the ball itself is a major headache to source. This one is 18" diameter so should be good for a 12" to 14" mirror maximum.


This is only a 17.7" diam. half-bowl, not the same design as the Portaball. For ATM design, I would not recommend it for anything bigger than say an 8" mirror, if you want a full range of movement.
Richard Low


Return to DIY Astronomy

Who is online

Users browsing this forum: No registered users and 1 guest