There has been talk that the mirror on the diagonal of the ETX degrades the light transmission by around 10%.
I'm curious to try a visual back option for my ETX.
Anyone know where I can get the visual back adapter for Meade ETX?
I want to try out using it without a diagonal for out-of-zenith objects.
Meade does not seem to sell one...
thanks
rich
Visual Back for ETX
- Airconvent
- Super Moderator
- Posts: 5787
- Joined: Tue Sep 30, 2003 11:49 pm
- Location: United Federation of the Planets
Visual Back for ETX
The Boldly Go Where No Meade Has Gone Before
Captain, RSS Enterprise NCC1701R
United Federation of the Planets
Captain, RSS Enterprise NCC1701R
United Federation of the Planets
Re: Visual Back for ETX
rich, did you try scopetronix? They might have. If not, try scopestuff.com....they are like a warehouse for all these parts.Airconvent wrote:There has been talk that the mirror on the diagonal of the ETX degrades the light transmission by around 10%.
I'm curious to try a visual back option for my ETX.
Anyone know where I can get the visual back adapter for Meade ETX?
I want to try out using it without a diagonal for out-of-zenith objects.
Meade does not seem to sell one...
thanks
rich
Worse come to worse, email weasner...he might know...
- Airconvent
- Super Moderator
- Posts: 5787
- Joined: Tue Sep 30, 2003 11:49 pm
- Location: United Federation of the Planets
nope...our resident scopetronix dealer, sam does not have one...
he did recommend to try apogee ....I'm hoping it won't cost and arm and a leg to satisfy my curiosity.. ..there appears to be one for US$26 but I can't confirm if its it....its called "eyepiece holder"
he did recommend to try apogee ....I'm hoping it won't cost and arm and a leg to satisfy my curiosity.. ..there appears to be one for US$26 but I can't confirm if its it....its called "eyepiece holder"
The Boldly Go Where No Meade Has Gone Before
Captain, RSS Enterprise NCC1701R
United Federation of the Planets
Captain, RSS Enterprise NCC1701R
United Federation of the Planets
- harlequin2902
- Posts: 744
- Joined: Tue Sep 30, 2003 11:04 am
- Location: Singapore, Sengkang
The guys at ScopeTronix are Meade dealers themselves so they may have an official Meade one , but again due to the tight control Meade exercises over their dealers, even ScopeTronix refuses to do me any special favours by shipping these controlled items out.its called "eyepiece holder"
How about this one ? (taken off apogee's page)
[ETX to 1.25"] Allows use of other 1.25" Accessories $29.95
Extreme left item shown in the pic. Seems like one end is made to be threaded into the rear "photographic" port of the ETX and the other end comes with a 1.25" well with a thumbscrew which allows you to insert your 1.25" diagonal or eyepieces into.
This one is made by Apogee, so they shouldn't have any problem shipping this out of the US to you.
Hope this helps.
Samuel Ng
- Airconvent
- Super Moderator
- Posts: 5787
- Joined: Tue Sep 30, 2003 11:49 pm
- Location: United Federation of the Planets