Previously in amateur astronomy we used to talk about "Takahashi", nowadays mostly on "connectivity", so trying out Raspberry.
[url=https://flic.kr/p/2nBG2oj]
Raspberry Pi 3B is the minimum requirement to run Astroberry, quite slow though, connected DSLR and Skyguider Pro, can detect both but the Drivers for the mount is Simulator, send no command to move the mount at all although it shows Sync position and goto in K-star.
Astroberry on Raspberry Pi 3B
Re: Astroberry on Raspberry Pi 3B
I tried stellarmate on my raspberri pi 4.. it works well with my az gti. it does detect canon eos rp and zwo asi462mc. need to start using the setup once the cloud clears up.
Re: Astroberry on Raspberry Pi 3B
Using Stellarmate on Raspberry Pi4, that's nice. My issue was actually caused by the mount itself, Skyguider pro is non-goto actually, otherwise Ekox/ Indi support should be good as well ...
Re: Astroberry on Raspberry Pi 3B
yes.. but you should be able to manually point it to sky, take a picture and plate solve it. once you have desired frame, you should also be able to guide it using a guidescope and guidecame.
Re: Astroberry on Raspberry Pi 3B
Quite true, waiting for clear sky la