wtb 0.965" to 1.25" eyepiece adapter ( found )

wucheeyiun · Post by **wucheeyiun** » Mon Oct 02, 2006 8:59 pm

Looking for the 0.965" to 1.25" eyepiece adapter,
anyone with a spare piece for sale.
pm me , please

wu chee yiun

chrisyeo · Post by **chrisyeo** » Tue Oct 03, 2006 1:26 am

I'm sure you know this already, but as a temporary measure, you can use a film canister as an adapter.

Cheers,
Chris

wucheeyiun · Post by **wucheeyiun** » Tue Oct 03, 2006 9:27 am

Hi, yes...it works ok for eyepieces but i am using it for the vixen GA-2 0.965" type guidescope which needed accurate centering.

Yes it is a good advice

Post by **weixing** » Tue Oct 03, 2006 9:37 am

Hi,

Hi, yes...it works ok for eyepieces but i am using it for the vixen GA-2 0.965" type guidescope which needed accurate centering.

Yes it is a good advice

I'm not sure about Vixen GA-2, but Vixen GA-4 0.965" can't use 1.25" eyepiece... I try with various 1.25" eyepiece, it just can't reach focus.

Have a nice day.

wucheeyiun · Post by **wucheeyiun** » Tue Oct 03, 2006 9:55 am

weixing, i just check too, mine is also the ga-3 0.965", i meant to slip it onto a 1.25" collar ...i already have a 10mm circle v .965 eyepiece for tracking.

Post by **weixing** » Tue Oct 03, 2006 10:29 am

Hi,

weixing, i just check too, mine is also the ga-4 0.965", i meant to slip it onto a 1.25" collar ...i already have a 10mm circle v .965 eyepiece for tracking.

Oh... So it should be a 1.25" to 0.965" eyepiece adapter.

Have a nice day.

rlow · Post by **rlow** » Tue Oct 03, 2006 12:47 pm

Hi Wu, I have a 1.25" to 0.965" adapter, but I am selling it together with a set of 6 nos. of 0.965" Vixen orthos... Have you also check with your friend Albert?

wucheeyiun · Post by **wucheeyiun** » Tue Oct 03, 2006 3:55 pm

Found, and weixing, thanks for the clarification :oops: