After many (many) failed attempts and wastage of 3D filament, I've finally managed to produce a low-latitude wedge for Tak mounts.
There are two versions: one for 3-series Gitzo tripods, and one for 5-series Gitzo tripods.
https://www.thingiverse.com/thing:3065973
3D Printed Low Latitude Wedge for Tak EM1/10/11
- orly_andico
- Posts: 1616
- Joined: Sun Aug 09, 2009 11:14 pm
- Location: Braddell Heights
- Contact: