Page 1 of 1
WTB: 2" Diagonal for refractor
Posted: Thu Sep 01, 2005 11:36 pm
by jermng
Hi,
Looking for 2" diagonal as mentioned above. Let me know what you have. Not looking for any particular model, so if anyone is looking to upgrade to one of those dielectric or quartz diagonals, sell me yours!! =)
Jeremy Ng
Re: WTB: 2" Diagonal for refractor
Posted: Fri Sep 02, 2005 9:17 pm
by lowrobin
jermng wrote:Hi,
Looking for 2" diagonal as mentioned above. Let me know what you have. Not looking for any particular model, so if anyone is looking to upgrade to one of those dielectric or quartz diagonals, sell me yours!! =)
Jeremy Ng
Hi Jeremy,
2" " New Generation Diagonal with 90degree star mirror precision 1/10 wave lambda surface with 10mm thichness mirror for refractor at $320 from W.O. , in stock can collect anytime. P.M. me if interested
Robin Low
Posted: Mon Sep 05, 2005 2:01 pm
by denebman
Hi, Jeremy,
I am providing homemade 2" 99% reflectivity dielectric mirror diagonal, the tube is made of stainless steel and the mirror cell is crafted from one solid aluminum block to insure permanent allignment.
Two pieces will be delivered to me in this month, I will also compare it to my Televue 2" everbrite diagonal. P.M. me if you are interested.