WTS:Tasco Starguide 4" Mak+Complete Accessories
Posted: Mon May 18, 2009 3:54 pm
Hi All,
I'm Selling My 4" Mak+Pier+Mount+Accessories+Original Alt Azi Computerized Table top mount.
It's Basically the same Scope as the Celestron NexStar 4.
Scope Specs
# Tasco Starguide 4" Maksutov-Cassegrain Telescope
# 1325mm Focal Length
# 102mm Objective
Mount Includes
# Mizar mount from the 80s
# Custom Pier
# CounterWeight
# aluminium tripod legs
# Custom Aluminium Saddle Plate.
i'm mounting the scope with just 2 pieces of Din rails and 2 Steel Ring Clamps.
Accessories Included
# Original 1.25" Eyepieces 10mm
# Original 1.25" Eyepieces 20mm
# Red Dot Star Pointer
# Omcon 1.25" 10mm plossl
# Omcon 1.25" 2x barlow
Table Top Mount
# Alt Azimuth Mount
# Serial Cable to connect Scope to PC
# GuideStar Tracking software
The GOTO works only with a PC/Notebook now becuse the Hand controller's LCD is Dead but the directional Keys
are still working. If you have a Celestron Nexstar Hand Controller the Goto mount will work fine. Self collect
from my home.
I'm pricing it all at $400. PM me if you are interested.
Shannon
I'm Selling My 4" Mak+Pier+Mount+Accessories+Original Alt Azi Computerized Table top mount.
It's Basically the same Scope as the Celestron NexStar 4.
Scope Specs
# Tasco Starguide 4" Maksutov-Cassegrain Telescope
# 1325mm Focal Length
# 102mm Objective
Mount Includes
# Mizar mount from the 80s
# Custom Pier
# CounterWeight
# aluminium tripod legs
# Custom Aluminium Saddle Plate.
i'm mounting the scope with just 2 pieces of Din rails and 2 Steel Ring Clamps.
Accessories Included
# Original 1.25" Eyepieces 10mm
# Original 1.25" Eyepieces 20mm
# Red Dot Star Pointer
# Omcon 1.25" 10mm plossl
# Omcon 1.25" 2x barlow
Table Top Mount
# Alt Azimuth Mount
# Serial Cable to connect Scope to PC
# GuideStar Tracking software
The GOTO works only with a PC/Notebook now becuse the Hand controller's LCD is Dead but the directional Keys
are still working. If you have a Celestron Nexstar Hand Controller the Goto mount will work fine. Self collect
from my home.
I'm pricing it all at $400. PM me if you are interested.
Shannon