3D Printed Low Latitude Wedge for Tak EM1/10/11

Wanna make a scope? Or better still, grind a mirror yourself. Or, you have some good tips in making a really useful accessory? This is the place to show what your hands can do...
Post Reply
User avatar
orly_andico
Posts: 1616
Joined: Sun Aug 09, 2009 11:14 pm
Location: Braddell Heights
Contact:

3D Printed Low Latitude Wedge for Tak EM1/10/11

Post by orly_andico »

After many (many) failed attempts and wastage of 3D filament, I've finally managed to produce a low-latitude wedge for Tak mounts.

There are two versions: one for 3-series Gitzo tripods, and one for 5-series Gitzo tripods.

https://www.thingiverse.com/thing:3065973
Post Reply