WTB:T-adapter, T-Ring for 150 mm Newtonian 1000 mm f7

Have a scope to sell? Or wanna find a good deal? This is your place to buy, sell or trade astro stuff!
Post Reply
tagore
Posts: 3
Joined: Mon Aug 23, 2004 11:47 pm

WTB:T-adapter, T-Ring for 150 mm Newtonian 1000 mm f7

Post by tagore »

WTB: 150 mm Newtonian 1000 mm f7 telescope?
I need a shot of a full moon, preferably covering half of the frame.

I think I need a T-adapter and T-Ring but is a motordrive for the telescope necessary for long exposures of the moon. But what combinations

I need to mount Minolta 800si on it.
cheers
User avatar
weixing
Super Moderator
Posts: 4708
Joined: Wed Oct 01, 2003 12:22 am
Favourite scope: Vixen R200SS & Celestron 6" F5 Achro Refractor
Location: (Tampines) Earth of Solar System in Orion Arm of Milky Way Galaxy in Local Group Galaxies Cluster

Post by weixing »

Hi,
I think you'll only need a T-Ring Adapter for your Minolta camera, which should be able to found in normal camera shop or you can get it from Astro Scientific Centre, and a T-Adapter for your scope if it doesn't have a T-Adapter on the focuser.

You may not need a motor drive since the exposure for shooting the moon should be very short... may be less than 1/60 second depend on your film ISO. Anyway, I'm not familiar with prime focus astrophotography, so cannot answer your questions. You should post all your questions in the Astrophotography section, so that those member that have experience in prime focus will see your questions and can answer your question.

Have a nice day.
Yang Weixing
:mrgreen: "The universe is composed mainly of hydrogen and ignorance." :mrgreen:
tagore
Posts: 3
Joined: Mon Aug 23, 2004 11:47 pm

Post by tagore »

thank you. cheers will get it.
Post Reply