Here is the place to talk about all those equipment(Telescope, Mounts, Eyepieces, etc...) you have. Not sure which scope/eyepiece is best for you? Trash it out here!
Yes, it is. But it is 90% correct.
The borg (Oasis) mount never catches my eyes until the last weekend when I had a chance to test one belonging to my friend. One reason is that the zenith cannot be reached becuase it is obstructed by the azimuth knob. But after inspecting careful, I noticed two screws connecting the arm and the azimuth part...
Last edited by anat on Mon Aug 28, 2006 10:58 am, edited 1 time in total.
After unscrewing, flipping, and re-assembing the arm, it is done!! It works very well for 66-80 mm. It is well-built from cast aluminum. The settling time is less than 2 sec for the setup. It is a good alternative to a small alt-az mount like Microstar.
eh, i have used that for years, yet i never though of flipping the arm. my version doesn't attach to the plate like yours, instead there's a something that allows u to adjust the altitude for equitorial mode. so for me i just adjust the altitude setting to reach zenith.
i just noticed ur alt knob is on the opposite side, u gonan do another mod to switch it over to ur side so it's easier to reach?
My friend made the bottom plate to change the screw size from 3/8" to 1/4". Japanese version is sold with the 1/4" screw footprint. As for the alt knob, an alt slow-motion cable can be attached to the opposite side of the alt knob.