Collimation of at1010 nighthawk

Here is the place to talk about all those equipment(Telescope, Mounts, Eyepieces, etc...) you have. Not sure which scope/eyepiece is best for you? Trash it out here!
User avatar
bodoh
Posts: 112
Joined: Thu May 27, 2004 10:10 pm
Location: Dover

Collimation of at1010 nighthawk

Post by bodoh »

Well, went out tonight to try out adjusted scope. Diffraction rings still off to one side but better than before. Will have to go and disturb Sam one day (If he doesn't mind) to get it sraightened out. The views are still pretty good though so no real rush... but it's like a scratch that won't go away.... MUST FIX IT OR WILL GO CRAZY EVENTUALLY!
User avatar
MooEy
Posts: 1275
Joined: Sat Oct 04, 2003 6:24 am

Post by MooEy »

err..u adjusted the lens cell?

~MooEy~
User avatar
bodoh
Posts: 112
Joined: Thu May 27, 2004 10:10 pm
Location: Dover

Post by bodoh »

On advice from Stellarvue... yes I did.
Erk! bad?!?
User avatar
VinSnr
Administrator
Posts: 2310
Joined: Sun Sep 28, 2003 7:01 pm
Location: Andromeda Galaxy

Post by VinSnr »

bodoh wrote:On advice from Stellarvue... yes I did.
Erk! bad?!?
dude, please don't do anything until you get the collimation check by using a cheshire.

I don't remember the at1010 has a collimatable lens cell.
User avatar
bodoh
Posts: 112
Joined: Thu May 27, 2004 10:10 pm
Location: Dover

Post by bodoh »

Sigh! May be a bit too late for that.

Vic Maris e-mail me about being perplexed saying that my new lens cell should not need collimation.

Samuel... when can I see you about that Chesire?
User avatar
harlequin2902
Posts: 744
Joined: Tue Sep 30, 2003 11:04 am
Location: Singapore, Sengkang

Post by harlequin2902 »

Vic Maris e-mail me about being perplexed saying that my new lens cell should not need collimation.

Samuel... when can I see you about that Chesire?
Hi,

You could come on one of the evenings this week (other than Wednesday) and we'll use the Cheshire. But actually, if the sky is clear, we could just test it on a real star.

Anyway :

Which picture below is the closest to what you see when you FOCUS on a bright star at high magnification ?

Picture A shows what you will see on a very well collimated scope. Pictures B, C and D show the same star in a scopes with varying degrees of mis-aligned optics. (of course, in reality, the rings could be skewed towards a different direction, depending on how the optics are misaligned on your scope)

A
Image

B
Image

C
Image

D
Image
Samuel Ng
User avatar
weixing
Super Moderator
Posts: 4708
Joined: Wed Oct 01, 2003 12:22 am
Favourite scope: Vixen R200SS & Celestron 6" F5 Achro Refractor
Location: (Tampines) Earth of Solar System in Orion Arm of Milky Way Galaxy in Local Group Galaxies Cluster

Post by weixing »

Hi,
I just wondering... AT1010 nighthawk should be a very good refractor and refractor should be quite difficult to go out of collimation... did you knock the refractor into something??

Have a nice day.
Yang Weixing
:mrgreen: "The universe is composed mainly of hydrogen and ignorance." :mrgreen:
User avatar
bodoh
Posts: 112
Joined: Thu May 27, 2004 10:10 pm
Location: Dover

Post by bodoh »

Nope... when I got it, it was C (see picture above) but After releasing some of the fastening screws its more of B. Won't rest until its A!
Could have been the focuser problem same as mooey's but was following Stellarvues advice...

Will try again tonight...
User avatar
bodoh
Posts: 112
Joined: Thu May 27, 2004 10:10 pm
Location: Dover

Post by bodoh »

Sam: Will try and meet you soon. Are you ok with later in the day like say at night? Don't want to abandon wife with the 2 kids until they maybe sleep or something.
User avatar
MooEy
Posts: 1275
Joined: Sat Oct 04, 2003 6:24 am

Post by MooEy »

err.. was it out of collimation b4 u loosen the the lens cell? i remember from one of ur other post u state that u have a problem with pinched optics.

to vin snr: newer version had the push pull lens cell, older version like mine was just a holder and not collimatable.

~MooEy~
Post Reply